Gordak 952 SMD Combo Digital Display Rework Soldering Station 2-in-1 Hot Air and Soldering Iron

****PLEASE READ THE DESCRIPTION BEFORE PLACING YOUR ORDERS****❕❕❕📢📢📢

Product Name: Gordak 952 SMD Combo Digital Display Rework Soldering Station 2-in-1 Hot Air and Soldering Iron
Model No. 952

Features:
🔴Hot Air Heater:
*Rated voltage: AC110V-220V
*Maximum power consumption: 270W
*Air pump mode: diaphragm type
*Display mode: double display
*Air flow: 0.3 ~ 4L / min stepless adjustment
*Temperature control range: 150 ° C ~ 500 ° C
*Control mode: closed-loop control
🔴Electric Iron Part:
*Power consumption: 60W
*Output voltage: AC24V
*Temperature control range: 200 ° C ~ 480 ° C
*Impedance between welding tip and ground: less than 2Ω
*Potential between welding tip and ground: less than 2ΩmV
*Heating element: ceramic heating core
*Heating body power: about 60W
*External dimensions: 245 (L) X184 (W) X135 (H) mm
🔴Description:
1. Wide range of temperature and airflow adjustment.
2. Cool air will start to blow continuously after using thus prolonging the usage life of the heating system.
3. Two real-time digital temperature monitors for actual temperature on hot air and iron.
4. Best suited for repairing QFP, SOP, PLCC, and SOJ components.
Note: The three air pump fixing screws on the bottom of the machine are designed to prevent the air pump from being damaged during transportation and must be disassembled before use, otherwise the machine will have a lot of noise during use, and the air pump is easily damaged.

🔴CONDITION: USED: The item was previously used and shows wear from consistent use, but it is fully operational and functions as intended. The item may show some limited signs of wear with small scratches, dents, etc.

Notes:
🔴Please allow 1-2 cm differences due to manual measurement.
🔴Product color may be slightly different due to photographic lighting sources or your monitor settings.

🔴Customer Satisfaction:
Not Satisfied?
1. For a seamless buying experience, you may initiate a Return/Refund if:
a. The product is defective or damaged and/or not functioning as described.
b. The product shipped is different from what you ordered.
2. What’s next:
a. Click the “Chat” and send us the actual photo of the item.
b. All product packaging: boxes, manuals, cards, etc. should be returned with the item.
Satisfied?
1. If you’re happy with your order, share your comments and feedback with the actual photos and give us a star!
2. We appreciate your support.